Always find a match for your railing

Q-lights Linear Light LED strips are available in lengths of 32.8 and 98.4 feet and are pre-wired on one side. You can easily create longer strips by joining them with a connector. To shorten the strips, you can cut the strips at nearly any point. All the strips are incredibly energy efficient. They also maintain their light density along their entire length.

Always find a match for your railing-image
https://strapiasi3pstore.blob.core.windows.net/strapi-uploads/assets/q_lights_linear_light_Content_Image_3c_16ad2e77a7.webp-image

High-grade safe LED handrails

Q-lights Linear Light LED for railings and stairs is available both for indoor and outdoor applications. You can confidently use this system in public spaces as the tough materials give it good protection against vandalism (IK10).
High-grade safe LED handrails-image

Specifications

Designed for

Light to heavy use (IK10)

Use

Indoor and outdoor (IP00 - IP67)

Varieties

Warm, and cold white light

Material

Handrail parts in high-quality aluminium and 304- or 316-grade stainless steel

Prefix options

Let us bend, cut or pre-drill your cap rails

Accessories

  • Connectors
    Universal connector to illuminate your railing on every corner
  • Transformers
    24V and 48V transformers
  • Power supplies
    Create a reliable power connection in just about any setting
  • LED strip cover profiles
    Clear and frosted options for covering your LED strips
  • Handrail bracket with cable duct
    Keep your LED strip safely out of sight
  • Wall return and flanges with cable duct
    Neatly hide your cables

Features

  • Cap rails to place on top of the glass as an LED handrail or to connect to handrail brackets for mounting sideways onto a wall or glass
  • Pre-cabled products
  • Extremely energy efficient
  • When using a cap rail on the top edge of a glass panel, you can choose to let the light illuminate the front or the back of the glass
  • Shield LED strips and prevent glare with clear or matt plastic cover profiles
  • Vandal proof (IK10)
  • .ies and .ldt files on request

FAQ

Am I allowed to install the LED strips?

Our products are SELV (separated extra-low voltage). You can therefore carry out the installation yourself. However, do get your installation checked by an electrician. Plus, the connection to the power grid must be executed by an electrician!

Can I solder the LED strips?

Yes, but the supplied length cannot be exceeded. Also, Q-railing will not take responsibility for problems caused by bad soldering. We always recommend the use of connectors.

Are the LED strips dimmable? 

Our LED strips are dimmable with the correct controller.

Can I just bend the LED strip instead of using a corner connector?

No, bending the LED strip horizontally will damage the strip. With a large enough bend radius, it may be possible, but it is not recommended. For bending vertically, check our data sheets, where you will find the maximum bending radii.

Why does my new LED strip not work?

  • You connected + and – to the transformer the wrong way round 
  • A cable is attached wrongly  
  • Too much bending during installation   
  • Too much twisting while unwinding the strip 
  • Pushed too hard on the LED points during installation

Do I really need to power each strip separately (as per Q-railing’s system architecture)?

Yes, otherwise the LED strip would lose brightness due to power loss. Plus, the lifespan of the LED strip would be decreased. To avoid this, it is necessary to power each LED strip separately.

Videos2

Sign up for our newsletter

Be among the first to receive updates around our products and services.

By registering for the newsletter, I consent to the processing of my personal data for the purpose of sending the newsletter and for newsletter tracking as described in more detail in the privacy policy.